| Hard Tooling:
Pipe and Duct Mandrels (8 stations):
| 10'-0" long: |
1/2", 3/4", 1", 156", 168", 180" internal diameter |
| 24'-0" long: |
1.5", 2", 2.5, 3", 4", 5", 6", 7", 8", 9", 10", 12", 14", 16", 18", 20", 22", 24", 26", 28", 30", 32", 34", 36", 42", 48" |
| 18'-0" long: |
54", 60", 72", 84" diameter |
| 22'-0" long: |
36" through 144", all dimensions, continuously adjustable. |
Vessel Shell Mandrels (2 stations):
| Any of the above, if required. |
| 36" - 72" fully adjustable, 22'-0" long |
| 72" - 144" fully adjustable, 22'-0" long |
| 156" diameter (13'-0") by 10'-0" long |
| 168" diameter (14'-0") by 10'-0" long |
| 180" - 288" adjustable (15'-0" - 24'-0" diameter) by 10'-0" long. |
Flange Molds:
1/2", 3/4", 1", 1-1/2", 2", 3", 4", 5", 6", 8", 10", 12", 14", 16", 18", 20", 24", 30" diameter.
Elbow Molds:
1/2", 3/4", 1", 1-1/2", 2", 3", 4", 5", 6", 7", 8", 9", 10", 12", 14", 16", 18", 20", 22", 24", 26", 28", 30", 32", 34", 36", 42", 48",54", 60", 72", 84", 96" diameter, continuous sweep through 48".
Vessel Head Tooling:
ASME F&D dish heads for 6", 8", 10", 12", 14", 16", 18", 20", 24", 30", 36", 42", 48",54", 60", 66", 72", 78", 84", 90", 96", 102", 108", 120", 132", 140", 144", 156", 168", and 180".
ASME flat heads for all the above sizes and custom sizes as required.
ASME 2:1 elliptical heads for 66", 84" and 96" diameter.
45° Cone mold 60° Cone mold
Miscellaneous Molds:
Various reducer, eccentric, concentric, duct (5:1) and pipe (2.5:1), shoe taps, as well as tee molds and special attachment molds for manways, baffles, internal rings, etc. |
