Fiberglass control consoles provide a corrosion resistant option with molded in color for process plant use. Seamless construction eliminates corrosion on edges. Light weight, inherent resistance to electrical current, ease of field modification to locate panel instruments and penetrations, as well as a virtually unlimited number of color options are all reasons to consider fiberglass. Shown are front and end views of standard size control panels available from Composites USA. Custom sizes and geometries are also available. Typical Specifications: Control consoles shall be fabricated in female molds resulting in smooth external finish with pigmented gel coat, using corrosion grade polyester resin and fiberglass. All corners to be molded with radiused reinforced corners. Doors are to be flush mount with quarter turn locking stainless steel hardware. The console is to be designed for the loads imposed by instrument mounting with a maximum deflection of ½% of span. Design is to be supported by engineering calculations by a staff mechanical engineer experienced in fiberglass structural design. Resin Polyester Resin Nominal Thickness 0.25" minimum with local reinforcement as required Flex Strength 31,800 psi (ASTM D-790) Flex Modulus 1,270,000 psi (ASTM D-790) Tensile Strength 20,000 psi (ASTM D-638) Tensile Modulus 1,430,000 psi (ASTM D-638) Flame Spread (Max.) 25 (ASTM E-84) Design & Construction: All one piece molded construction with smooth (mold surface) exterior and removable access door panels. Corrosion resistant – Suitable for the application Self-supporting with local reinforcement as required All cut edges to be resin sealed. Instrument cutouts field located unless otherwise specified. Molded in color, white or gray standard, custom match available.