Composites USA strainers are designed and manufactured for rugged industrial use in corrosive environments. Basket, as well as wye strainers are manufactured for liquid or gas service as shown by the 8" diameter (pipeline) basket strainer example on this page. The basket strainer assembly allows in-line filtering and straining of particulate matter from process liquids. The flanged top assembly allows removal and thorough cleaning of filter media during regularly scheduled maintenance outages. The removable basket / filter media is typically a thermoplastic or high nickel alloy such as Monel or Hastelloy. A low point drain connection permits periodic flushing without disassembly. The strainer laminate begins with a resin rich corrosion barrier, reinforced with a fiberglass or synthetic veil and several layers of random chopped strand mat. The structural portion of the laminate is constructed with random chopped strand mat and biaxial continuous strand glass. The resin selected may be matched to the process piping, but typically high performance vinyl esters are chosen for this service. With a Composites USA strainer, you get equipment designed to the latest codes, and quality audited to MIL-I-45208 and Factory Mutual standards. All resins used are corrosion resistant and specifically selected for the service, polyester, vinyl ester, epoxy or furan, with flame retardant options available. Typical Specifications: Resin Vinyl Ester Thickness As required to meet specified pressure (0.375" min.) Flex Strength (Min.) 23,800 psi (ASTM D-790) Flex Modulus (Min.) 1,100,000 psi (ASTM D-790) Tensile Strength (Min.) 16,400 psi (ASTM D-638) Tensile Modulus (Min.) 1,500,000 psi (ASTM D-638) Filter Media Monel 8 gauge wire mesh, or other as specified