|
Figure # |
Description |
|
Duct / Pipe |
|
|
100 |
Round Duct |
|
101 |
Round Duct-Offset |
|
105 |
Rectangular Duct |
|
106 |
Rectangular Duct - Offset |
|
107 |
Oval Duct |
|
|
|
|
Elbows & Bends |
|
|
110 |
90° Standard Long Radius Sweep Elbow |
|
111 |
90° Short Radius Elbow |
|
115 |
45° Standard Long Radius Sweep Elbow |
|
116 |
45° Short Radius Elbow |
|
118 |
22.5° Standard Radius Sweep Elbow |
|
120 |
90° Long Radius 3-Gore Mitered Elbow |
|
121 |
90° Short Radius 3-Gore Mitered Elbow |
|
125 |
45° Long Radius 2-Gore Mitered Elbow |
|
126 |
45° Sho rt Radius 2-Gore Mitered Elbow |
|
130 |
90° Long Radius 5-Gore Mitered Elbow |
|
131 |
90° Short Radius 5-Gore Mitered Elbow |
|
135 |
45° Long Radius 3-Gore Mitered Elbow |
|
136 |
45o Short Radius 3-Gore Mitered Elbow |
|
137 |
30o Long Radius 2-Gore Mitered
Elbow |
|
138 |
30o 2-Gore Mitered S.R. Elbow |
|
140 |
90° Rectangular Easy Bend 3-Gore Mitered Elbow |
|
141 |
90° S. R. Rectangular Easy Bend 3-Gore Mitered Elbow |
|
145 |
90° Rectangular Hard Bend 3-Gore Mitered Elbow |
|
146 |
90° S. R. Rectangular Hard Bend 3-Gore Mitered Elbow |
|
147 |
90° Rectangular Easy Bend 2-Gore Elbow |
|
148 |
90° Rectangular Hard Bend 2-Gore Elbow |
|
Transitions & Reducers |
|
150 |
Transition, Square to Round |
|
159 |
Offset-Transition |
|
160 - 11 |
Concentric Reducer 5:1 |
|
160 - 22 |
Concentric Reducer 2.5:1 |
|
160-53 |
Concentric Reducer, 1:1 |
|
160 - 60 |
Concentric Reducer 0.86:1 |
|
160 - 90 |
Concentric Reducer 0.5:1 |
|
165 - 11 |
Eccentric Reducer 5:1 |
|
165 - 22 |
Ecentric Reducer 2:5:1 |
|
169 |
Offset-Reducer |
|
Tees, Taps, Wyes, and Crosses |
|
170 |
Tee, Standard Round |
|
172 |
90° Bonded Reducing Tee |
|
172-PT |
90° Pre Configured Tap |
|
172-ST |
90° Saddle Tap(for field installation) |
|
172-FT |
90o Factory installed ReducingTap |
|
175 |
90° Conical Bonded Tee |
|
175PT |
90° Conical Preconfigured Tap |
|
175ST |
90° Conical Saddle Tap |
|
175FT |
90° Conical Factory Installed Tap |
|
177 |
90° Shoe Bonded Tee |
|
177-PT |
90° Shoe Preconfigured Tap |
|
177-ST |
90° Shoe Saddle Tap |
|
177-FT |
90° Shoe Factory Installed Tap |
|
182 |
45° Lateral Bonded Tee |
|
182-PT |
45° Lateral Preconfigured Tap |
|
182-ST |
45° Lateral Saddle Tap |
|
182-FT |
45° Factory Installed Tap |
|
185 |
45° Double Wye |
|
186 |
45° Reducing Wye |
|
187 |
45° Double Reducing Wye |
|
190 |
90° Bonded Tangential Tee |
|
192 |
45° Bonded Tangential Tee |
|
195 |
True Wye |
|
197 |
90o Cross |
|
Flanges, Couplings, Caps, Accessories |
|
200 |
Stub Flange |
|
205 |
Blind Flange |
|
210 |
End Cap |
|
212 |
End Cap Dished |
|
220 |
Slip Alignment Coupling - External |
|
225 |
Slip alignment Coupling - Internal |
|
230 |
Access Door - Flush |
|
235 |
Access Door - Flanged Stand-off |
|
250 |
Stack Cap No Loss Cap |
|
255 |
Stack Cap Rain Cap |
|
260 |
Roof Curb Cap |
|
270 |
Flex Connector - Slip On |
|
275 |
Flex Connector - Flanged |
|
280 |
Sample Tap - Flanged |
|
285 |
Drain Tap - Threaded |
|
286 |
Drain Tap Leg & Valve |
|
Butterfly, Gate, Check, Backdraft |
|
300 |
Volume (Butterfly) Damper |
|
300-FF |
Flanged Volume Damper |
|
310 |
Volume Damper with Shoe Tap |
|
325 |
Slide (Blast) Gate Damper |
|
325-FF-D |
Slide (Blast) Gate Damper (flanged end) |
|
330 ES |
|
|
335 |
Slide Gate Damper with Shoe Tap |
|
340 |
Slide Damper - Low Profile (for automation) |
|
350 |
Backdraft Damper - Wafer |
|
380 |
Rectangular Backdraft Damper - Parallel Blade |
|
385 |
Rectangular Control Damper - Opposed Blade |
|
390 |
Backdraft Damper - Stack Cap |
|
|
|
